Products // ChordBits

ChordBits 1.1

For Windows XP, Windows 7

What is ChordBits?

Well, if you happen to be an embedded software programmer or an electronics engineer, or anyone that needs to crunch bits from time to time, please take a look at the following 3 figures.
If the first one reminds you the feeling of "oh, not again..", but the next two give a sense of hope (and maybe joy!), then I believe that you might like ChordBits!

Section	Bits	Description
EN0	0	Enables IO channel 0
COUNT0	1, 2	Sets number of bytes to write into channel 0
TIMEDIV0	3, 4	Sets baud rate for IO channel 0 (selects one of 4 options)
MASK0	5, 6, 7	Selects which interrupts to enable for channel 0
I0	8	Max. number of bytes in a burst for channel 0
IZ0	9	Zero byte ends a burst for channel 0
B0	10	Restarts transmission on error for channel 0
BW0	11	Introduces a delay before transmission on error for channel 0
M0	12	Cyclic transmission for channel 0
MW0	13	Introduces a delay between transmission cycles for channel 0
reserved	14, 15	Reserved bits
EN1	16	Enables IO channel 1
COUNT1	17, 18	Sets number of bytes to write into channel 1
TIMEDIV1	19, 20	Sets baud rate for IO channel 1 (selects one of 4 options)
MASK1	21, 22, 23	Selects which interrupts to enable for channel 1
I1	24	Max. number of bytes in a burst for channel 1
IZ1	25	Zero byte ends a burst for channel 1
B1	26	Restarts transmission on error for channel 1
BW1	27	Introduces a delay before transmission error for channel 1
M1	28	Cyclic transmission for channel 1
MW1	29	Introduces a delay between transmission cycles for channel 1
reserved	30, 31	Reserved bits